1972/1900 ALL JEEP 258 6=8 Intake Manifold 258
Quantity in Basket:
Shipping Weight: 16.00 pounds
All Jeep 199/232/258 cid.
Water Jacket will even fuel and air flow so all cylinders get the same amount of air and fuel.
08-1013 will allow you to bolt a Weber 38 DEGAS to your 6=8 Intake Manifold.
08-1014 will allow you to bolt a Holley or Edelbrock 4 brl carb to your 6=8 Intake Manifold.
Our Ram Flow Manifold is a single plane,open plenum, single carb
design, making it Clifford's most versatile manifold.
It has an open plenum, allowing the user to mate
a 2 barrel, 4 barrel or fuel injection system to the
manifold with the addition of an adapter plate. This
manifold is made of cast aluminum and is a competition
style for performance. The true beauty of this manifold
is that it works exceptionally well on the street, thanks
to our water heated passage along the bottom of the
manifold. No matter where in the world the user is
located, the water heated passage is a must for daily
street use. By using a water/coolant mix to heat the
manifold, we can atomize the fuel without boiling it,
creating a consistent running engine. This manifold
requires a minimum of 350 cfm, and will not bolt onto your
engine with the factory cast iron exhaust manifolds.
We recommend the Weber 38-38 DGAS, two brl carb, or Holley 390 CFM 4 brl carb.
Jetting the 390 Holley = 8.5 power valve, .031 discharge nozzle & .048 main jets.