PHONE 951-471-1161

FAX 951-471-0993

 

 

 

YOU WILL FIND 6=8 HEADERS/INTAKES/CAMS & MORE IN THE "STORE"!

 

JEEP/AMC 258/4.0

 

CHEVY 194/230/250/292

 

CHEVY 235/261

 

CHEVY 153 4 CYLINDER

 

FORD 170/200/250

 

FORD 240/300

 

FORD 215/223/262

 

MOPAR 170/225

 

HUDSON 308

 

 

 

 

 

Join us on facebook. http://www.facebook.com/people/Larry-Clifford/100003073553601

 

6=8 Clifford Performance is the YOUTUBE place to go!

GO TO THIS TO WATCH THIS RACE! This is what a flat torque curve looks like.

http://www.youtube.com/watch?v=NqRjPy_1AM4

                   CHEVY 235/261

TWIN FUEL DELIVERY SYSTEM.

                         $1,395.00

                         6=8C235

   

 

CHEVY 235/261___ TWIN WEBER FUEL DELIVERY SYSTEM.

BOLT ON 100% POWER & TORQUE GAINS!

Your new Weber DGAS carbs are set up & ready to bolt on.

 

 

 

 

 

MOPAR 225 TWIN WEBER 38 DGES FUEL SYSTEM!

 

 

 

BOLT THIS ON AND FEEL THE 6=8 DIFFERENCE!

                                  $1,389.00

 

Great power gains 120%

Great MPG 6 to 10 MPG

What are you waiting for?

 

 

Set up and ready to bolt on!

Chevy 194/230/250/292 TWIN WEBER 38/38 CARB KIT.

                                  $1,389.00!

The upgrade certainly helps move his Chevy Van down the road.

Kit includes:

6=8 Dual Open Plenum Intake Manifold w/water jacket & oversized runners. MPG, Power & Torque gains are massive!

(2) Weber DGES 38/38 Carbs.

Air Cleaners w/cleanable filters

Redline Fuel Regulator

Smile is no charge!

*

 

 

 

 

JEEP/AMC 6=8 COMBINATION 4.0 HEAD CONVERSION

 

                                          Part # 57-0242                                             

 

     

 

47-4520WH Intake Manifold W/Water Fittings

57-2015 Dual Headers

Headers Gasket

Street Hookup Kit w/2 ¼” down pipes

08-7038-K Weber 38/38 DGAS 2 Brl Carb Kit

08-1013 Carb Adaptor

08-5084 Large Diaphragm Fuel Regulator

08-7084 Redline Air Cleaners/Cleanable Air Filter

08-7116 Redline Linkage Kit

 

Your Weber 38 will be set up and ready to go out of the box.

Normal power & torque gains are up to 70% and in most cases

better MPG as well.

 

KIT PRICE $1,199.00

 

Your kit also will bolt on with the 4 Liter Head Conversion.

 

 

 

 

 

 

 

 

 

 

 

JEEP/AMC 6=8 COMBINATION 1972/90 - 258 4.2

 

                                          Part # 57-0258                                             

 

     

 

47-4500WH Intake Manifold W/Water Fittings

57-2300 Dual Headers

Header Stud Kit

Headers Gasket

Street Hookup Kit w/2 ¼” down pipes

08-7038-K Weber 38/38 DGAS 2 Brl Carb Kit

08-1013 Carb Adaptor

FORD 240/300 6=8 COMBINATION 1965-UP 2X4/4X4

 

                                          Part # 53-0300                                             

 

    

 

 

 

 

 

43-4502WH Intake Manifold W/Water Fittings

53-0960 Dual Headers

Header Stud Kit

Headers Gasket

Street Hookup Kit w/2 ¼” down pipes

08-7038-K Weber 38/38 DGAS 2 Brl Carb Kit

08-1013 Carb Adaptor

08-5084 Large Diaphragm Fuel Regulator

08-7084 Redline Air Cleaners/Cleanable Air Filter

08-7116 Redline Linkage Kit

 

Chevy 194/230/250/292  6=8 COMBINATION 1962-UP

PONTIAC OHV ENGINES

 

                                          Part # 52-0250                                                        

 

    

 

42-4501WH Intake Manifold W/Water Fittings

52-0011 Dual Headers

Header Stud Kit

Headers Gasket

Street Hookup Kit w/2 ¼” down pipes

08-7038-K Weber 38/38 DGAS 2 Brl Carb Kit

08-1013 Carb Adaptor

08-5084 Large Diaphragm Fuel Regulator

08-7084 Redline Air Cleaners/Cleanable Air Filter

08-7116 Redline Linkage Kit

 

Your Weber 38 will be set up and ready to go out of the box.

Normal power & torque gains are up to 70% and in most cases

better MPG as well.

 

KIT PRICE $1,199.00

Chevy 250/292 Truck wanting 52-0768 Long Tube Headers Price $1,257.00

 

Chevy 235/261  6=8 COMBINATION 1948-62

 

                                          Part # 52-0235                                                        

    

 

42-4500WH Intake Manifold W/Water Fittings

52-0015 Dual Headers 1948-51 & 1955-57

52-0025 Dual Headers 1952-54 & 1958 & UP

Header Stud Kit

Headers Gasket

Street Hookup Kit w/2 ¼” down pipes

08-7038-K Weber 38/38 DGAS 2 Brl Carb Kit

08-1013 Carb Adaptor

08-5084 Large Diaphragm Fuel Regulator

08-7084 Redline Air Cleaners/Cleanable Air Filter

08-7116 Redline Linkage Kit

 

Your Weber 38 will be set up and ready to go out of the box.

Normal power & torque gains are up to 70% and in most cases

better MPG as well.

 

KIT PRICE $1,199.00

 

                 FORD 223   6=8 COMBINATION                                                                 

 

    

 

43-4501WH Intake Manifold W/Water Fittings

53-0020 Dual Headers * TRUCK

53-0030 Dual Headers *CAR

Headers Gasket

Street Hookup Kit w/2 ¼” down pipes

08-7038-K Weber 38/38 DGAS 2 Brl Carb Kit

08-1013 Carb Adaptor

08-5084 Large Diaphragm Fuel Regulator

08-7084 Redline Air Cleaners/Cleanable Air Filter

08-7116 Redline Linkage Kit

 

Your Weber 38 will be set up and ready to go out of the box.

Normal power & torque gains are up to 70% and in most cases

better MPG as well.

MOPAR 225 6=8 COMBINATION 198/225

 

                                          Part # 55-0225                                                        

 

   

 

45-4500WH Intake Manifold W/Water Fittings

55-0010 Dual Headers HIGH STARTER LOCATION

55-0020 Dual Headers LOW STARTER LOCATION

Headers Gasket

Street Hookup Kit w/2 ¼” down pipes

08-7038-K Weber 38/38 DGAS 2 Brl Carb Kit

08-1013 Carb Adaptor

08-5084 Large Diaphragm Fuel Regulator

08-7084 Redline Air Cleaners/Cleanable Air Filter

08-7116 Redline Linkage Kit

 

Your Weber 38 will be set up and ready to go out of the box.

Normal power & torque gains are up to 70% and in most cases

better MPG as well. Our Weber carbs are fine tunable, making

them the best velocity carb in the World for your Inline Engine.

 

                 6=8 DUAL HEADERS FOR YOUR JEEP

JEEP/AMC 258     1972/90                                                                                             $359.00

 

 

 

 

57-2015 AMC/JEEP          1987-06    242/4.0                                             $359.00

 Header in the picture is ceramic coated & do not

Does Not include smog fittings.

 

          6=8 INTAKE MANIFOLDS  JEEP/AMC

MAKE                                     DESCRIPTION                                               PART #                                         

AMC/JEEP                            199, 232, 258                                                                        47-4500WH                   $319.00

 

 

 

AMC/JEEP        4.0L 1991/06 INTAKE W/ADAPTOR                       47-4520WH      $319.00                     

QUICK THROTTLE RESPONSE! OFF IDLE PURE TORQUE!

MID RANGE TORQUE & HORSE POWER!

HIGH END HORSE POWER!

NOTHING COMPARES TO 6=8 CAST ALUMINUM INTAKE MANIFOLDS!

*ALL 6=8 INTAKE MANIFOLDS WILL NEED AN ADAPTOR FOR THE CARB

YOU ARE PLANNING TO BOLT ON.

CHEVY 235/261 HEADERS

ALL HEADERS ARE DUAL OUTLET

                          

All Bodies- 1952-54 & 58-up, 216/235/261 SHORTY                                      52-0025       $359.00

 

 

All Bodies         1951 & earlier & 1955-57 bodies                                 52-0015       $359.00

                                                                                                                                             

All GMC           1948-59                248, 270, 302 SHORTY                              52-0040       $359.00             

 

Header Stud Kit                                                                                        HSK8          $24.00   

 

6=8 CAST ALUMINUM INTAKE MANIFOLDS

 

MAKE                                      DESCRIPTION                                                 PART #                                         

CHEVY                                  235, 261                                                                                    42-4500WH             $319.00

 

CHEVY/ PONTIAC            194, 230, 250, 292 OHV                                                  42-4501WH             $319.00

 

 

 

CHEVY                                  153 4 CYLINDER INTAKE                        42-4506WH             $319.00

 

QUICK THROTTLE RESPONSE! OFF IDLE PURE TORQUE!

MID RANGE TORQUE & HORSE POWER! HIGH END HORSE POWER!

NOTHING COMPARES TO 6=8 CAST ALUMINUM INTAKE MANIFOLDS!

CHEVY DUAL HEADERS

 

52-0011 STEET ROD HEADERS                                                         

CARS/Trucks 1963-87                194, 230, 250, 292 SHORTY                                 52-0011 $359.00     

52-0768 DUAL TRUCK CHEVY HEADERS

 

 

All Trucks        1963-87                230, 250, 292 33” LONG TUBE.                     52-0768          $439.00

 

Chevy S-10       1982-93                151 4 CYLINDER IRON DUKE CROSSFLOW           52-1362       $359.00

w/ SMOG FITTINGS.  ALSO FITS GMC S-15.

 

 

                                                     

All ENGINES   1962-70                       153 4 CYL.                                                                         52-1408       $359.00

 

Header Stud Kit                       HSK8                                                      $24.00

 

 

  • ALL CLIFFORD HEADERS INCLUDE OUR CLIFFORD HEADER GASKETS & STREET HOOKUP KITS.
  • Flanges are 3/8” laser cut, tubes are 16 gauge, 1 ½” o.d. 2 ½” Collectors
  • Run 2 ¼” exhaust pipes with (3) Chamber Magnaflow Mufflers & 18” of pipe after you r mufflers.
  • Street Hookup kit (2 ¼” cone redusers/3 ring gaskets/nuts & bolts        58-0032 $30.00

                                              FORD HEADERS

 

BODY STYLE     YEAR                  ENGINE SIZE w/ codes                              PART #         PRICE                  

FORD 223 TRUCKS* ALL 6 CYLINDER HEADERS ARE DUAL OUTLET

                           1952-64                    215, 223, 262 TRUCKS DUAL OUTLET           53-0020       $359.00

 

 

FORD 240/300 HEADERS

 

                                

1965-79                240, 300 2 & 4 X4                                                                53-0960       $439.00

 

Header Stud Kit                                                                                        HSK13           $33.00

  • Flanges are 3/8” laser cut, tubes are 16 gauge, 15/8” o.d. 2 ½” Collectors
  • Run 2 ¼” exhaust pipes with (3) Chamber Magnaflow Mufflers & 18” of pipe after you r mufflers.

6=8 INTAKE MANIFOLDS & ADAPTOR FORD

MAKE                                     DESCRIPTION                                               PART #                                         

 

FORD                                    223, 262                                                         43-4501WH             $319.00

 

 

MAKE                                     DESCRIPTION                                               PART #                                         

 

FORD                                    240, 300                                                         43-4502WH             $319.00

 

 

QUICK THROTTLE RESPONSE! OFF IDLE PURE TORQUE!

MID RANGE TORQUE & HORSE POWER!

HIGH END HORSE POWER!

NOTHING COMPARES TO 6=8 CAST ALUMINUM INTAKE MANIFOLDS!

                      FORD DUAL HEADERS                                                 

 53-2112 Fits 1960 to 1963 170/200 Engines & all 250 Engines   $359.00

                                      

MUSTANG 170/200 HEADERS

              

                           1964-77              170, 200 SQUARE BODY CHASSIS.  5                      53-0186       $359.00             

                                                      NOTE:  THESE HEADERS INCLUDE A PORT DIVIDER

                          

1966-77                    144, 170, 200, 250 BRONCO                                               53-2111       $359.00

09-0240 –Y- pipe                                                                             $39.00

09-0250 –X- pipe                                                                            $119.00

Header Stud Kit                                                                                        HSK11        $33.00   

  • ALL CLIFFORD HEADERS INCLUDE OUR CLIFFORD HEADER GASKETS & STREET HOOKUP KITS.
  • Flanges are 3/8” laser cut, tubes are 16 gauge, 1 ½” o.d. 2 ½” Collectors
  • PORT DIVIDERFORD 144, 170, 200, 250 ONLY                      73-1136       $20.00

    NOTE:  SEPERATES THE SIAMESE EXHAUST PORT IN THE CYLINDER HEAD.

     

  HUDSON HEADERS

 

                                     

1948-56                    232, 262, 308      54-0032                                                   $359.00       

                           MOPAR 170/225 HEADERS

                                        1960-87                    170, 198, 225 SHORTY.  Hi starter                55-0010       $359.00

 

 

                          

 

                           1960-87                       170, 198, 225 SHORTY.  Low starter            55-0020       $359.00

 

                          

                           09-0250 –X- pipe                                                   $119.00

 

ALL CLIFFORD HEADERS INCLUDE OUR CLIFFORD HEADER GASKETS & STREET HOOKUP KITS.                                                

              6=8 INTAKE MANIFOLDS MOPAR 225

 

MAKE                                     DESCRIPTION                                               PART #                                         

 

MOPAR                                 170, 198, 225                                                 45-4500WH             $319.00

08-1013 Holley or Weber (2) brl adaptor

08-1014 Holley or Edelbrock 500 (4) brl adaptor Included with your order.

 

HEADER / INTAKE GASKETS

 

HIGH HEAT INT/EXH GASKETS                                                                                                                  PRICE $20.00.

 

 

HEADER STUD KIT

 

MAKE             ENGINE        PART # PRICE

FORD    215, 223, 262            HSK10   $34.00

FORD    144, 170, 200, 250    HSK11    $36.00

FORD    240, 300                    HSK13      $38.00

GMC      248, 270, 300            HSK8    $24.00

 

 

MAKE             ENGINE          PART #   PRICE

AMC/JEEP 199, 232, 258        HSK12      $38.00

AMC/JEEP 2.5L 4 CYL               HSK8      $24.00

AMC/JEEP 4.0L                            KSK11    $33.00

CHEVY 8      235, 261               HSK8   $24.00

CHEVY 8  194, 230, 250, 292  HSK8    $24.00

CHEVY 6    153, 181 4 CYL      HSK6    $24.00

CARB ADAPTERS

ITEM                                    DESCRIPTION                                                  PART #                         

CLIFFORD 2V                 ADAPTS A HOLLEY 2300 SERIES, OR WEBER DGS                08-1013       $68.00

ADAPTER*                        2 BARREL CARB TO ANY CLIFFORD RAM FLOW

                                                                 INTAKE MANIFOLD.  INTAKE MANIFOLDS REQUIRE

                                                                 A MINIMUM OF 350 CFM.

CLIFFORD 4V                 ADAPTS A SQUARE BORE 4 BARREL CARB TO ANY           08-1014       $48.00   

ADAPTER*                        CLIFFORD RAM FLOW INTAKE MANIFOLD.

 

WEBER IDF                       ADAPTS WEBER IDF CARB OR WEBER TBI TO ANY           08-1044          $89.00

ADAPTER                                      CLIFFORD RAM FLOW INTAKE MANIFOLDS.  CARBS

                                                                 CAN ONLY BE USED IN RACING APPLICATIONS.

 

GM TBI ADAPTER         ADAPTS GM TBI OR HOWELL TBI TO ANY CLIFFORD       08-1630          $99.00

                                                                 RAM FLOW INTAKE MANIFOLD

                 WEBER FORD 170-200-250

FORD ADAPTER                 ADAPTS  WEBER DGV OR DGAS                                 08-1651       $89.00

INTEGRAL HEAD                TO FORD 144, 170, 200, 250 INTEGRAL

                                                                 HEAD INTAKE MANIFOLD

                                                                 STUD CENTERS => 2 3/4”                                                                                            

          

 

FORD ADAPTER                 ADAPTS  WEBER DGV OR DGAS                                 08-1650       $89.00

INTEGRAL HEAD                TO FORD 144, 170, 200, 250 INTEGRAL

                                                                 HEAD INTAKE MANIFOLD

                                                                 2 BARREL PATTERN => 1 13/16” x 3 5/8”

                                                                 1 BARREL BOLT CENTERS => 3 5/8”

*NEW DESIGN FOR  BETTER FLOW AND MORE HOOD  CLEARANCE.                                                                   

 

  

                  DUAL WEBER CARB KITS

 

MAKE                                  DESCRIPTION                                            PART #                  Price      

CHEVY                               194, 230, 250, 292 OHV                                             08-7000              $1,289.00

 

CHEVY TWIN WEBER 32-36 CARB KIT

System includes: Weber 32/36 DGV progressive 2 brl carb, adaptors, air cleaners, linkage,

Fuel regulator & 6=8 dual carb Intake Manifold.

 

 

                                         

CHEVY TWIN WEBER 38/38 CARB KIT                                08-7001-38                  $1,389.00

 CHEVY TWIN WEBER 38/38 CARB KIT

System includes: Weber 38/38 DGAS syncrones 2 brl carb, adaptors, air cleaners, linkage,

Fuel regulator & 6=8 dual carb Intake Manifold.

FORD 240/300 DUAL WEBER COMBINATION

 

FORD 240/300 TWIN WEBER 38/38 CARB KIT

FORD                                 240, 300                                                                               08-7000-F             $1,389.00

System includes: Weber 38/38 DGAS syncrones 2 brl carb, adaptors, air cleaners, linkage,

Fuel regulator & 6=8 dual carb Intake Manifold.

 

 

 

FORD                                 240, 300                                                                               08-7000-F             $1,289.00

System includes: Weber 32/36 DGV syncrones 2 brl carb, adaptors, air cleaners, linkage,

Fuel regulator & 6=8 dual carb Intake Manifold.

         CLIFFORD CARB KITS

 

 

FORD 200/25038DGAS 3 5/8” BOLT CENTERS          08-K200 $599.00

 

FORD 170/200 32/36 3 5/8” BOLT CENTERS               08-K201 $589.00

        

FORD 200/250 38/38 DGES 2 3/4” BOLT CENTERS   08-K202 $599.00

        

FORD 170/200/250 32/36 2 3/4” BOLT CENTERS       08-K203  $589.00

 

        

                             

 

Take your stock carb off and measure the two studs. They will be 2 3/4” or 3 5/8” stud center to center.

 

Carb kits include:

Weber carb set up, Air Cleaner/Linkage Kit/6=8 Adaptor/Redline Fuel Regulator.

CLIFFORD CAMSHAFTS

AMC/JEEP 232, 258, 2.5L, 4.0L

1974 – 2002

HYDRAULIC CAMS

 

Cam & Kit Price $369.00

 

       CAM PART #             VALVE LIFT        ADV.            DUR.        RPM        GENERAL CHARACTERISTICS                                          

6 CYL          w/ 1.6 RATIO                           DUR.            .050”                                                                                                                         

                                                                                                            2,000       TORQUE CAMSHAFT.  BEST CHOICE FOR 4wd                         

97-2021        .474”                 264                    206                 to                          APPLICATIONS.  HEADERS & 2 OR 4 BARREL                               

                                                                                                            4,500       RECOMMENDED.  SMOOTH IDLE.  STICK OR AUTO.

Characteristics of the 264 hyd cam is 80% torque off idle, peak torque at 3,300 rpm’s peak horse power at 4,300 rpm’s. 2,000    TORQUE CAMSHAFT.  BEST CHOICE FOR 4wd                    

97-3021EFI                         .474”                 264               206            to           off idle                                                                                              APPLICATIONS.  HEADERS & 2 OR 4 BARREL                   

                                                                                                            4,500       RECOMMENDED.  SMOOTH IDLE.  STICK OR AUTO.

 

 

                                                                                                            2,200       LOW & MID RANGE CAM.  FOR BEST RESULTS

97-2041        .478”                 272                    214                 to                           USE A 2 OR 4 BARREL INTAKE SYSTEM & HEADERS                   

                                                                                                            5,000       GOOD IDLE.  STICK  ONLY.                                                                                                                                                                

                                                                                                            2,500       MID RANGE PROFILE.  WORKS WELL IN HIGH

 

97-2081        .498”                 280                    226                 to                           COMPRESSION ENGINES.  4 BARREL & HEADERS                       

                                                                                                            5,500       A MUST.  FAIR IDLE.  STICK  ONLY.                                          

                                                                                                            3,000       MID RANGE & TOP END DESIGN.  WORKS WELL IN               

 

 

97-2111        .510”                 290                    232                 to                           HIGH COMPRESSION ENGINES.  4 BARREL &                                

                                                                                                            6,000       HEADERS A MUST.  ROUGH IDLE.  STICK  ONLY.                    

 

  • ALL CLIFFORD CAMS MUST USE A CLIFFORD CAM KIT OR WARRANTY IS VOID.
  • WHEN USING A STOCK  EFI OR HOWELL FUEL INJECTION SYSTEM, ADD  “- EFI”

 

 

HYDRAULIC CAM KIT w/ STOCK VALVES                     HYDRAULIC CAM KIT w/ 11/32” VALVES *

            PART # 97-2891                                                                 PART # 97-3996

232, 258                                ITEM                                                                                             232, 258, 242/4.0                  ITEM  

97-1901                  HYDRAULIC TAPPETS                                  97-1901                  HYDRAULIC TAPPETS       

91-2911                  SPRINGS w/ DAMPERS                                  91-2911                  SPRINGS w/ DAMPERS       

                                                                                                                                     

95-1941                  SPRINGS RETAINERS 8mm                     92-3942                  SPRINGS RETAINERS         

97-2801                  HD PUSHRODS                                                      97-2801                  HD PUSHRODS                         

97-1821                  HD VALVE LOCKS 3/8”                                               92-1821                                          HD VALVE LOCKS                              

 

                                                                        

                                                                                                                                                                                     

 

HYDRAULIC CAM KIT w/ STOCK VALVES                    

            PART # 97-3996                                                                

242/4.0                   ITEM                                                                                                   

97-1901                  HYDRAULIC TAPPETS                                                     

91-2911                  SPRINGS w/ DAMPERS                                                                                                                                                           

93-2941                  SPRINGS RETAINERS 8mm                                         

97-2801                  HD PUSHRODS                                                     

                                                                                                         

EFI Engines use custom 6=8 camshafts. Call for information. 4 & 6 cylinder engines

 

SPRING INSTALL HEIGHT 1.700 OR 115 LBS SEAT PRESSURE.

 

                                        CLIFFORD CAMSHAFTS

CHEVY 194, 230, 250, 292

HYDRAULIC CAMS

Cam & Kit Price $399.00

       CAM PART #             VALVE LIFT        ADV.            DUR.        RPM        GENERAL CHARACTERISTICS                                          

194 - 250      292               w/ 1.75 RATIO      DUR.            .050”                                                                                                                      

                                                                                                            IDLE       HIGH TORQUE DESIGN.  IDEAL FOR DAILY DRIVER               

92-3021        92-4021             .518”                 264               206            to           APPLICATIONS. PEAK HP 4,300 RPMS.                                             

                                                                                                            4,500         STICK OR AUTO. PEAK TORQUE 3,300 RPM’S

                                                                                                            2,200       STRONG LOW/MID RANGE CAMSHAFT.  WORKS BEST           

92-3041        92-4041             .524”                 272               214            to           WITH 2 OR 4 BARREL INTAKE SYSTEM &                                    

                                                                                                            5,000       HEADERS.  GOOD IDLE.  STICK  OR AUTO.                               

                                                                                                            2,500       MID RANGE, TOP END DESIGN.  4 BARREL RAM                     

92-3081        92-4081             .544”                 280               226            to           FLOW INTAKE & HEADERS RECOMMENDED.                               

                                                                                                            5,500       ROUGH IDLE.  STICK  ONLY.                                                       

                                                                                                            3,000       MID RANGE, TOP END DESIGN.  4 BARREL RAM                     

92-3091        92-4091             .558”                 290               232            to           FLOW INTAKE & HEADERS RECOMMENDED.                              

                                                                                                            6,000       ROUGH IDLE.  STICK  ONLY.                                                       

                                                                                                            3,200       MID RANGE, TOP END DESIGN.  4 BARREL RAM                     

92-3102        92-4102             .614”                 302               242            to           FLOW INTAKE & HEADERS RECOMMENDED.                              

                                                                                                            6,500       ROUGH IDLE.  STICK  ONLY.                                                       

ALL CLIFFORD CAMS MUST USE A CLIFFORD CAM KIT OR WARRANTY IS VOID.

 

HYDRAULIC CAM KIT FOR 194, 230, 250 ENGINES                             HYDRAULIC CAM KIT FOR 292 ENGINES

KIT PART # 92-3981                                                                                                   KIT PART # 92-4981

PART #        QTY         ITEM                                                                                    PART #         QTY         ITEM                                                        

92-3901        12            HYDRAULIC TAPPETS                                                       92-3901        12            HYDRAULIC TAPPETS                            

91-2911        12            SPRINGS w/ DAMPERS                                                        91-2911        12            SPRINGS w/ DAMPERS                            

                                     INSTALL @ 115 lbs.                                                                                                INSTALL @ 115 lbs.

92-3942        12            SPRINGS RETAINERS 11/32”                                             92-3942        12            SPRINGS RETAINERS 11/32”                 

92-3801        12            HD PUSHRODS                                                                     92-4801        12            HD PUSHRODS                                          

92-1821        24            HD VALVE LOCKS 11/32”                                                  92-1821        24            HD VALVE LOCKS 11/32”                       

 

91-2922        12            DUAL SPRINGS (FOR USE w/ GRINDS                                91-2922        12            DUAL SPRINGS (FOR USE w/ GRINDS    

                                     290H & 302H)   INSTALL @ 135 lbs.                                                                      290H & 302H)  INSTALL @ 135 lbs.

                                                                                                                                                                                       

CHEVY 194, 230, 250, 292

MECHANICAL CAMS

       CAM PART #             VALVE LIFT        ADV.            DUR.        RPM        GENERAL CHARACTERISTICS                                          

194 - 250      292               w/ 1.75 RATIO      DUR.            .050”                                                                                                                      

                                                                                                            2,200       LOW & MID RANGE CAM.  WORKS BEST WHEN            

92-3162       92-4162            .573”                 270               240            to           IMPROVED INTAKE SYSTEM IS USED.  HEADERS A          

                                                                                                            5,000       MUST.  GOOD IDLE.VALVE LASH (.020” Int / .022” Ex).   

                                                                                                            2,500       STRONG MID RANGE CAM. IMPROVED INTAKE           

92-3182       92-4182            .581”                 280               246            to           & EXHAUST RECOMMENDED.  FAIR IDLE.                          

                                                                                                            5,500       VALVE LASH (.024” Int / .026” Ex).                                         

                                                                                                             2,500       SHORT TRACK CAM.  DESIGNED TO BE USED WITH     

92-3192       92-4192        .581” / .618”     280 / 290      246 / 256        to           OUR RAM FLOW 2 OR 4 BARREL INTAKE SYSTEM.          

                                                                                                            5,800       ROUGH IDLE.  VALVE LASH (.024” Int / .028” Ex).             

                                                                                                             3,000       SHORT TRACK CAM DESIGNED TO BE USED WITH       

92-3202       92-4202            .618”                 290               256            to           LIMITED CARBURETION.  ROUGH IDLE.                               

                                                                                                            6,000       VALVE LASH (.026” Int / .028” Ex).                                         

                                                                                                            3,500       1/2 MILE CAM.  DESIGNED TO BE USED WITH RAM      

92-3222       92-4222            .651”                 302               262            to           FLOW 2 OR 4 BARREL INTAKE & HEADERS.                        

                                                                                                            6,500       VALVE LASH (.028” Int / .030” Ex).                                         

                                                                                                            3,500       5/8 MILE CAM.  WORKS BEST WITH 4 BARREL CARB   

92-3232       92-4232        .651” / .635”     302 / 310      262 / 272        to           CARB OR WEBER ASSEMBLY.  HEADERS A MUST.            

                                                                                                            6,800       VALVE LASH (.028” Int / .030” Ex).                                         

                                                                                                            4,000       TOP END PROFILE INTENDED FOR USE IN DRAG          

92-3252       92-4252        .635” / .647”     310 / 320      270 / 276        to           RACE APPLICATIONS.                                                                  

                                                                                                            7,000       VALVE LASH (.028” Int / .030” Ex).                                         

MECHANICAL CAM KIT FOR 194, 230, 250 ENGINES                         MECHANICAL CAM KIT FOR 292 ENGINES

KIT PART # 92-3982                                                                                                 KIT PART # 92-4982

PART #       QTY        ITEM                                                                                   PART #       QTY        ITEM                                                        

91-2922       12            DUAL SPRINGS    INSTALL @ 135 lbs.                       91-2922        12DUALSPRINGS  INSTALL @ 135 lbs.           

92-3942       12            SPRINGS RETAINERS 11/32”                                        92-3942        12            SPRINGS RETAINERS 11/32”             

92-3801       12            HD PUSHRODS                                                                 92-4801        12            HD PUSHRODS                                      

92-1821       24            HD VALVE LOCKS 11/32”                                              92-1821        24            HD VALVE LOCKS 11/32”                   

                  CLIFFORD CAMSHAFTS

CHEVY 235 & 261

1954 – 1962

HYDRAULIC CAMS

Cam & Kit Price $599.00

       CAM PART #             VALVE LIFT        ADV.            DUR.        RPM        GENERAL CHARACTERISTICS                                          

LARGE BEARING          w/ 1.5 RATIO        DUR.            .050”                                                                                                                      

                                                                                                             IDLE    TORQUE CAMSHAFT.  PEAK TORQUE 3,300 RMS            

            92-1021                     .444”                 264               206            to           PEAK HP 4,300 RPMS                                                                     

                                                                                                            4,500     STICK OR AUTO.                                                                        

                                                                                                            2,200       STRONG MID RANGE CAM.  WORKS BEST                       

            92-1061                     .449”                 272               214            to           WITH 2 OR 4 BARREL INTAKE SYSTEM &                              

                                                                                                            4,800       HEADERS.  GOOD IDLE.  STICK  ONLY.                              

 

  • ALL CLIFFORD CAMS MUST USE A CLIFFORD SPRING KIT OR WARRANTY IS VOID. INSTALL SPRINGS AT 100 LBS

 

HYDRAULIC CAM KIT FOR 235 & 261 ENGINES

KIT PART # 92-1981

PART #        QTY         ITEM                                                         

92-1901       12            HYDRAULIC TAPPETS                       

91-2911       12            SPRINGS w/ DAMPER                          

                                     INSTALL @ 115 lbs.

92-3942       12            SPRINGS RETAINERS 11/32”              

92-1801       12            CHROME MOLY  PUSHRODS           

92-1821       24            HD VALVE LOCKS 11/32”                   

                                                                                                                                                                                       

CHEVY 235 & 261

1954 – 1962

MECHANICAL CAMS KIT PRICE $599.00

       CAM PART #             VALVE LIFT        ADV.            DUR.        RPM        GENERAL CHARACTERISTICS                                          

LARGE BEARING          w/ 1.5 RATIO        DUR.            .050”                                                                                                                       ____

                                                                                                             2,000       PRODUCES MORE TORQUE &  POWER THAN                 

            92-1132                     .428”                 260               210            to           ANY CAM w/o ADDITIONAL FUEL CONSUMPTION.           

                                                                                                            4,200       VERY SMOOTH IDLE.  VALVE LASH (.016” Int / .018”

                                                                                                            2,100       PRODUCES MORE TORQUE &  POWER THAN ANY       

            92-1142                     .447”                 268               222            to           CAM w/o ADDITIONAL FUEL CONSUMPTION.                    

                                                                                                            4,500       FAIRLY SMOOTH.  VALVE LASH (.018” Int / .020” Ex).    

                                                                                                            2,200       MID RANGE DESIGN.  RAM FLOW 2 OR 4 BARREL        

            92-1152                     .490”                 270               240            to           INTAKE SYSTEM & HEADERS RECOMMENDED.                 

                                                                                                            4,800       GOOD IDLE.  VALVE LASH (.020” Int / .022” Ex).                

                                                                                                            2,500       MID RANGE CAMSHAFT RECOMMENDED FOR            

            92-1192                 .498” / .530”     280 / 290      246 / 256        to           SHORT TRACK W/ LIMITED CARBURETION                         

                                                                                                            5,200       MUST BE USED.  VALVE LASH (.024” Int / .026” Ex).         

                                                                                                            3,000       MID RANGE TOP END CAM DESIGNED FOR                    

            92-1212                 .530” / .515”     290 / 300      256 / 262        to           3/8 & 1/2 MILE CARS.  GOOD EQUIPMENT A                          

                                                                                                            5,500       MUST.  VALVE LASH (.024” Int / .026” Ex).                           

                                                                                                            3,000       TOP END CAM  5/8 MILE OVAL & DRAG                           

            92-1232                 .558” / .545”     300 / 310      262 / 272        to           RACE APPLICATIONS.  4 BARREL CARB A MUST.              

                                                                                                            6,000       VALVE LASH (.028” Int / .030” Ex).                                         

 

  • ALL CLIFFORD CAMS MUST USE A CLIFFORD SPRING KIT OR WARRANTY IS VOID. INSTALL SPRINGS AT 100 LBS

 

MECHANICAL CAM KIT FOR 235 & 261 ENGINES

KIT PRICE # 92-1982

PART #        QTY         ITEM                                                         

92-1902       12            MECHANICAL TAPPETS                    

91-2911       12            SPRINGS w/ DAMPER                          

                                     INSTALL @ 115 lbs.

92-3942       12            SPRINGS RETAINERS 11/32”              

92-1801       12            HD PUSHRODS                                      

92-1821       24            HD VALVE LOCKS 11/32”                                                                                                                                                                  

                                         

CLIFFORD CAMSHAFTS

FORD 240, 300 HYDRAULIC CAMS Cam & Kit Price $399.00

       CAM PART #             VALVE LIFT        ADV.            DUR.        RPM        GENERAL CHARACTERISTICS                                          

            6 CYL                    w/ 1.6 RATIO        DUR.            .050”                                                                                                                       ____

                                                                                                            Idle          HIGH TORQUE . Peak Torque at 3,300 rpms/peak                 

            93-3021                     .474”                 264               206            to           Horse Power at 4,300 rpms.                                                         

                                                                                                            4,500       STICK OR AUTO.                                                                        

                                                                                                            1,100       LOW & MID RANGE CAM.  FOR BEST RESULTS USE     

            93-3031                     .478”                 272               214            to           A RAM FLOW 2 OR 4 BARREL INTAKE SYSTEM &              

                                                                                                            5,000       HEADERS A MUST.  GOOD IDLE.  STICK  OR AUTO.       

                                                                                                            2,500       MID RANGE PROFILE.  WORKS WELL IN HIGH              

            93-3081                     .498”                 280               226            to           COMPRESSION ENGINES.  4 BARREL & HEADERS              

                                                                                                            5,500       A MUST.  FAIR IDLE.  STICK  ONLY.                                    

                                                                                                            3,000       MID RANGE & TOP END DESIGN.  RECOMMENDED     

            93-3111                     .510”                 290               232            to           w/ STANDARD TRANSMISSION ONLY.  4 BARREL &           

                                                                                                            6,000       HEADERS A MUST.  ROUGH IDLE.                                       

                                                                                                            3,300       MID RANGE & TOP END DESIGN.  RECOMMENDED     

            93-3102                     .562”                 302               242            to           STANDARD TRANSMISSION ONLY.  4 BARREL &                

                                                                                                            6,500       HEADERS A MUST.  ROUGH IDLE.                                       

 

  • ALL CLIFFORD CAMS MUST USE A CLIFFORD SPRING KIT OR WARRANTY IS VOID.
  • INSTALL SPRINGS AT 115 LBS

 

HYDRAULIC CAM KIT FOR 240 & 300 ENGINES

KIT PART # 93-3981

PART #             QTY         ITEM                                                                                         

93-3901            12            HYDRAULIC TAPPETS                                                        

91-2911            12            SPRINGS w/ DAMPERS  INSTALL @ 120 lbs.                   

92-3942            12            SPRINGS RETAINERS 11/32”                                              

93-3801            12            HD PUSHRODS                                                                       

92-1821            24            HD VALVE LOCKS 11/32”                                                    

 

91-2922            12            DUAL SPRINGS (FOR USE w/ GRINDS                             

                                          290H & 302H)  INSTALL @ 135 lbs.             

                                                                                                                                                                                       

FORD 240, 300 MECHANICAL CAMS

  CAM PART #                VALVE LIFT        ADV.            DUR.        RPM        GENERAL CHARACTERIC’S

                                                                                                             2,200       LOW & MID RANGE CAMSHAFT.  WORKS BEST W/       

            93-3162                     .532”                 270               240            to           IMPROVED INTAKE & EXHAUST SYSTEM IS USED.             

                                                                                                            5,000    STICK ONLY.  VALVE LASH (.020” Int / .022” Ex).               

                                                                                                            2,500       STRONG MID RANGE DESIGN. IMPROVED INTAKE      

            93-3182                     .531”                 280               246            to           SYSTEM & HEADERS RECOMMENDED.  FAIR IDLE.          

                                                                                                            5,500       STICK ONLY.  VALVE LASH (.024” Int / .026” Ex).               ______

                                                                                                            2,500       SHORT TRACK CAM.  DESIGNED TO BE USED WITH     

            93-3192                 .531” / .565”     280 / 290      246 / 256        to           OUR RAM FLOW 2 OR 4 BARREL INTAKE SYSTEM.           

                                                                                                            5,800       ROUGH IDLE.  VALVE LASH (.024” Int / .026” Ex).              ______

                                                                                                            3,000       SHORT DURATION HIGH LIFT PROFILE.  WORKS          

            93-3202                     .565”                 290               256            to           WELL IN LIMITED CARBURETION APPLICATIONS.           

                                                                                                            6,000       ROUGH IDLE.  VALVE LASH (.026” Int / .028” Ex).                  ______

                                                                                                            3,000     MID RANGE TOP END CAM RECOMMENDED ON         

            93-3212                 .565” / .549”     290 / 300      256 / 262        to           3/8 & 1/2 MILE TRACKS.      

                                                                                                            6,300       VALVE LASH (.024” Int / .026” Ex).                                        

                                                                                                            3,500       MID RANGE TOP END CAM.  USED ON 3/8 & 1/2 MILE                

            93-3222                     .595”                 300               262            to           TRACK WITH UNLIMITED CARB.                                              

                                                                                                            6,500         VALVE LASH (.028” Int / .030” Ex).                                        ______

                                                                                                            4,000       5/8 MILE CAM.  GOOD EQUIPMENT A MUST.  FULL      

            93-3232                     .606”                 310               270            to           CARBURETION RECOMMENDED.                                            

                                                                                                            6,800       VALVE LASH (.028” Int / .030” Ex).                                          ______

                                                                                                            4,500       HIGH RPM DRAG RACE CAMSHAFT.                                 

            93-3252                     .619”                 320               274            to               

                                                                                                            7,000       VALVE LASH (.028” Int / .030” Ex).                                          ______

MECHANICAL CAM KIT FOR 240 & 300 ENGINES

KIT PART # 93-3982 PART #                                                     QTY                  ITEM          

91-2922       12            SPRINGS W/DAMPERS                       

92-3942       12            SPRINGS RETAINERS 11/32”                

93-3801       12            HD PUSHRODS

92-1821       24            HD VALVE LOCKS 11/32”                   


CLIFFORD CAMSHAFTS

FORD 170, 200, 250 Cam & Kit Price $399.00

HYDRAULIC CAMS

PART #                  VALVE LIFT                      ADV.        DUR.        RPM        GENERAL CHARACTERISTICS                                          

6 CYL      w/ 1.5 RATIO        w/ 1.6 RATIO        DUR.        .050”                                                                                                                       ____

                                                                                                             Idle          HIGH TORQUE DESIGN. 80% torque off idle

93-2021            .444”                 .474”                264          206            to           peak torque @ 3,300 rpms, peak  HP @ 4,300 rpms         

                                                                                                            4,500    STICK OR AUTO.                                                                         

                                                                                                            2,200       STRONG MID RANGE CAM.  WORKS BEST Brl                 

93-2041            .449”                 .478”                272          214            to           OR TRIPLE ONE BARREL CARB & HEADERS.  GOOD         

                                                                                                            5,000       IDLE.  STICK  ONLY.                                                                 

                                                                                                            2,500       MID RANGE & TOP END PROFILE.  WORKS BEST IN     

93-2081            .467”                 .498”                280          226            to           HIGH COMPRESSION ENGINES.  IMPROVED INTAKE        

                                                                                                            5,500       EXHAUST RECOMMENDED.    STICK  ONLY.                   

 

  • ALL CLIFFORD CAMS MUST USE A CLIFFORD CAM KIT OR WARRANTY IS VOID.

                                                                                                                                                

HYDRAULIC CAM KIT FOR 170, 200, 250 ENGINES KIT PART # 93-2981

PART #        QTY         ITEM                                                                                

93-2901       12            HYDRAULIC TAPPETS                                               

97-3912       12            SPRINGS w/ DAMPERS  INSTALL @ 115 lbs.          

93-2941       12            SPRINGS RETAINERS 5/16”                                       

93-2821       24            HD VALVE LOCKS 5/16”

 

93-2801       12            HD PUSHRODS (170, 200 w/ ADJ. ROCKER ARMS)                

93-2802       12            HD PUSHRODS (250 w/ ADJ. ROCKER ARMS)     

 

                                                                                                                                                                                       

FORD 144, 170, 200, 250

MECHANICAL CAMS

PART #                  VALVE LIFT                  ADV.        DUR.            RPM        GENERAL CHARACTERISTICS                                          

6 CYL      w/ 1.5 RATIO        w/ 1.6 RATIO    DUR.        .050”                                                                                                                           ____

                                                                                                            2,000       LOW RPM TORQUE CAM DESIGN

93-2132            .428”                 .456”            260          210                 to                                                                                                                        

                                                                                                            4,300     STICK OR AUTO.  VALVE LASH (.018” Int / .020” Ex).       

                                                                                                            2,200       LOW & MID RANGE DESIGN.  WORKS BEST w/                

93-2152            .447”                 .477”            270          222                 to           IMPROVED INTAKE & EXHAUST SYSTEM.     

                                                                                                            5,000       STICK  ONLY.  VALVE LASH (.022” Int / .024” Ex).            

                                                                                                            2,500       STRONG MID RANGE CAM.   STANDARD TRANS           

93-2182            .464”                 .494”            280          238                 to           CAR, w/ IMPROVED INTAKE & EXHAUST SYSTEM.             

                                                                                                              5,500       IDLE.  STICK . VALVE LASH (.024” Int / .026” Ex).              

                                                                                                            2,500       SHORT TRACK CAM.  DESIGNED TO BE USED w/            

93-2192            .498”                 .531”       280 / 290      246 / 256        to           LIMITED CARBURETION.  FAIR IDLE.                                    

                                                                                                            5,800       VALVE LASH (.024” Int / .026” Ex).                                         

                                                                                                            3,000       MID RANGE DESIGN.  IDEAL FOR 3/8 MILE CARS.         

93-2202            .530”                 .565”            290          256                 to           IMPROVED INTAKE & EXHAUST RECOMMENDED.          

                                                                                                            6,000       ROUGH IDLE.  VALVE LASH (.026” Int / .028” Ex).             

                                                                                                            3,500       DRAG RACE & ½ MILE CAM.  HEADERS & LARGE       

93-2222            .558”                 .595”            300          262                 to           CARB A MUST.  ROUGH IDLE.                                                    

                                                                                                            6,500       VALVE LASH (.028” Int / .030” Ex).                                         

                                                                                                            4,000       DRAG RACE ONLY CAM.                                                       

93-2252            .561”                 .598”            310          270                 to           RECOMMENDED                                                                            

                                                                                                            7,000       VALVE LASH (.028” Int / .030” Ex).                                         

 

MECHANICAL CAM KIT FOR 144, 170, 200, 250 ENGINES

KIT PART # 93-2982

PART #             QTY         ITEM                                                                                         

91-2911            12            SPRINGS w/ DAMPERS  INSTALL @ 115 lbs.                   

93-2941            12            SPRINGS RETAINERS 5/16”                                                

93-2821            24            HD VALVE LOCKS 5/16”                                                      

93-2801            12            HD PUSHRODS (144, 170, 200

93-2802            12            HD PUSHRODS (250                                                              

91-2922            12            DUAL SPRINGS (REQ. w/ 280/290 & LARGER GRINDS)

                                          INSTALL @ 135 lbs.

                                                                                                                                                                    


CLIFFORD CAMSHAFTS

MOPAR 170, 198, 225 MECHANICAL CAMS

Cam & Kit Price $399.00

 

PART #                  VALVE LIFT                      ADV.             DUR.        RPM        GENERAL CHARACTERISTICS                                     

6 CYL      w/ 1.5 RATIO        w/ 1.6 RATIO        DUR.             .050”                                                                                                                  ____

                                                                                                                 2,000       LOW RPM TORQUE CAM IMPROVES THROTTLE     

95-1132            .428”                 .456”                260               210            to           RESPONSE & ACCELERATION.   SMOOTH IDLE.            

                                                                                                                 4,500       STICK OR AUTO.  VALVE LASH (.016” Int / .018” Ex)

                                                                                                                 2,200       HIGH TORQUE DESIGN.  IDEAL FOR RV                       

95-1152            .447”                 .477”                268               222            to           WORKS BEST WITH HEADERS.  SMOOTH IDLE.               

                                                                                                                 5,000       STICK  ONLY.  VALVE LASH (.016” Int / .018” Ex).        

                                                                                                                 2,400       STRONG MID RANGE CAM.  IMPROVED INTAKE     

95-1182            .464”                 .494”                280               238            to           EXHAUST SYSTEM RECOMMENDED.  FAIR IDLE.         

                                                                                                                   5,300       STICK  ONLY.  VALVE LASH (.016” Int / .018” Ex).        

                                                                                                                 2,500       SHORT TRACK CAM DESIGNED TO BE USED w/         

95-1192            .498”                 .531”            280 / 290      246 / 256        to           LIMITED CARBURETION.  ROUGH IDLE.  STICK            

                                                                                                                 5,000       ONLY.  VALVE LASH (.024” Int / .026” Ex).                      

                                                                                                                 3,000       SHORT TRACK CAM.  WORKS BEST w RAM FLOW   

95-1202            .530”                 .565”                290               256            to           INTAKE & HEADERS.  ROUGH IDLE.                                   

                                                                                                                 5,800       VALVE LASH (.026” Int / .028” Ex).                                    

                                                                                                                 2,500       1/2 MILE CAMSHAFT.  DESIGNED TO BE USED w/ 4   

95-1212       .530” / .515”     .565” / .549”     290 / 300      256 / 262        to           BRL RAM FLOW INTAKE SYSTEM & HEADERS.              

                                                                                                                 5,000       ROUGH IDLE.  VALVE LASH (.026” Int / .028” Ex).        

                                                                                                                 3,500       1/2 & 5/8 MILE DESIGN.  WORKS BEST w/ 4 BRL           

95-1222            .558”                 .595”                300               262            to           CARB OR WEBER SIDE DRAUGHT ASSEMBLY.               

                                                                                                                 6,300       ROUGH IDLE.  VALVE LASH (.028” Int / .030” Ex).        

                                                                                                                 4,000       TOP END CAMS INTENDED FOR DRAG RACE            

95-1252            .561”                 .598”                310               270            to           APPLICATIONS.                                                                          

                                                                                                                 6,800       ROUGH IDLE.  VALVE LASH (.028” Int / .030” Ex).        

                                                                                                                 4,500       DRAG RACE CAM ONLY.  WORKS BEST w/ WEBER  

95-1272            .580”                 .619”                320               274            to           SIDE DRAUGHT ASSEMBLY.                                                  

                                                                                                                 7,000       VALVE LASH (.028” Int / .030” Ex).                                    

 

MECHANICAL CAM KIT FOR 170, 198, 225 ENGINES

KIT PART # 95-1982

PART #             QTY         ITEM                                                                                         

95-1902            12            MECHANICAL TAPPETS                                                    

97-3912            12            SPRINGS w/ DAMPERS                                                        

                                          INSTALL @ 115 lbs.

95-1941            12            SPRINGS RETAINERS 3/8”                                                  

95-1821            12            HD VALVE LOCKS 3/8” 2 GROOVES                                

95-2821            12            HD VALVE LOCKS 3/8” 4 GROOVES                                

*95-1801          12            HD PUSHRODS (170 w/ ADJ. ROCKER ARMS)              

*95-1802          12            HD PUSHRODS (198, 225 w/ ADJ. ROCKER ARMS)      

91-2922            12            DUAL SPRINGS (REQ. w/ 280/290 & LARGER GRINDS)                                                                              

                                          INSTALL @ 135 lbs.

 

 

MOPAR 170, 198, 225 HYDRAULIC CAMS

Kit Price $399.00

PART #                  VALVE LIFT                      ADV.        DUR.        RPM        GENERAL CHARACTERISTICS                                          

6 CYL      w/ 1.5 RATIO        w/ 1.6 RATIO        DUR.        .050”                                                                                                                       ____

                                                                                                            2,000       TORQUE MONSTER CAM.

95-2021            .444”                 .474”                264          206            to                                                                                                                        

                                                                                                            4,500       STICK OR AUTO.                                                                        

                                                                                                            2,200       STRONG MID RANGE CAM.  WORKS BEST w/ 2               

95-2061            .449”                 .478”                272          214            to           OR 4 BARREL CARB & HEADERS.                                             

                                                                                                            5,000       GOOD IDLE.  STICK  ONLY.                                                    

                                                                                                            2,500       MID RANGE & TOP END PROFILE.  WORKS BEST IN     

95-2081            .467”                 .498”                280          226            to           HIGH COMPRESSION ENGINES.  IMPROVED INTAKE        

                                                                                                            5,500       EXHAUST RECOMMENDED.  ROUGH IDLE.  STICK  ONLY.  

 

  • ALL CLIFFORD CAMS MUST USE A CLIFFORD CAM KIT OR WARRANTY IS VOID.

 

HYDRAULIC CAM KIT FOR 170, 198, 225 ENGINES

KIT PART # 95-1981

PART #             QTY         ITEM                                                                                         

95-1901            12            HYDRAULIC TAPPETS                                                        

91-2911            12            SPRINGS w/ DAMPERS                                                        

95-1941            12            SPRINGS RETAINERS 3/8”                                                  

95-1821            12            HD VALVE LOCKS 3/8” 2 GROOVES                                

95-2821            12            HD VALVE LOCKS 3/8” 4 GROOVES                                

95-1801            12            HD PUSHRODS (170                                                              

95-1802            12            HD PUSHRODS (198, 225

 

 

                     


CLIFFORD CAMSHAFTS

FORD 223 1954 – 1964

MECHANICAL CAMS / REGRINDS ONLY $229.00

       CAM PART #        VALVE LIFT         ADV.            DUR.        RPM        GENERAL CHARACTERISTICS                                              

                                     w/ 1.4 RATIO         DUR.            .050”                                                                                                                             ____

                                                                                                        1800        HIGH TORQUE CAMSHAFT.  THE BEST CHOICE WHEN    

            93-1132                 .399”                 260               210            to           BRUTE MUSCLE IS REQUIRED.  HEADERS                                          

                                                                                                        4400        SMOOTH IDLE.  VALVE LASH (.016” Int / .018” Ex).               

                                                                                                        2200        MID RANGE DESIGN.  RAM FLOW 2 OR 4 BARREL            

            93-1152                 .458”                 270               240            to           INTAKE SYSTEM & HEADERS RECOMMENDED.                     

                                                                                                        5000        GOOD IDLE.  VALVE LASH (.020” Int / .022” Ex).                    

                                                                                                        2400        MID RANGE DRAG DESIGN.  RAM FLOW 2 OR 4 BARREL             

            93-1182                 .465”                 280               246            to           INTAKE SYSTEM & HEADERS RECOMMENDED.                     

                                                                                                        5500        POOR IDLE.  VALVE LASH (.024” Int / .026” Ex).                     

 

  • ALL CLIFFORD CAMS MUST USE A CLIFFORD CAM KIT OR WARRANTY IS VOID.
  • I NEED YOUR CAM CORE.

MECHANICAL CAM KIT FOR 223 ENGINES $179.00

KIT PART # 93-1982

PART #        QTY         ITEM

93-

91-2911       12            SPRINGS w/ DAMPER                          

                                     INSTALL @ 115 lbs.

92-3942       12            SPRINGS RETAINERS 11/32”              

93-1801       12            HD PUSHRODS                                      

92-1821       24            HD VALVE LOCKS 11/32”                   

Send us your lifters $11.00 each.                                                                                                                                                      

HUDSON 232, 262, 308

1948 – 1956

MECHANICAL CAMS / REGRINDS ONLY

       CAM PART #        LOBE LIFT           ADV.            DUR.        RPM        GENERAL CHARACTERISTICS        $199.00                         

            6 CYL                                             DUR.            .050”                                                                                                                           ____

                                                                                                        2000        113 LS. CAMSHAFT.  WORKS BEST WHEN

            H 117                    .372”                 254               222            to           IMPROVED INTAKE & EXHAUST SYSTEM IS USED.           

                                                                                                        4300        VALVE LASH (.010” Int / .012” Ex) HOT LASH RUNNING.    

                                                                                                        3200        113 LS.  DESIGN. IMPROVED INTAKE                                      

            H 116                    .391”                 268               232            to           SYSTEM & HEADERS RECOMMENDED.  FAIR IDLE.             

                                                                                                        4800        VALVE LASH (.016” Int / .018” Ex) HOT LASH RUNNING.    

                                                                                                        3500        113 LS.  DESIGNED TO BE USED WITH                                      

            H 118                    .402”                 276               242            to           OUR RAM FLOW 2 OR 4 BARREL INTAKE SYSTEM.              

                                                                                                        5200        VALVE LASH (.016” Int / .018” Ex) HOT LASH RUNNING.    

                                                                                                                                                                                       

 

 

PONTIAC 230/250 OHC

 

REGRINDS ONLY

$229.00

       CAM PART #             VALVE LIFT        ADV.            DUR.        RPM        GENERAL CHARACTERISTICS                                          

                                                                        DUR.            .050”                                                                                                                       ____

                                                                                                             2,200       Broad power range.                                                                      

            96-5102                     .450”                 270               N/A           to                                                                                                                        

                                                                                                            5,500       VERY SMOOTH IDLE.   

                                                                                                            2,500       Street or Competition                                                          

            96-5152                     .465”                 280               N/A           to               

                                                                                                             6,000       Stick shift only

                                                                                                            3,000       Mid range & Top end. Stick Shift only.                                       

            96-5202                     .490”                 300               N/A           to                                                                                                                        

                                                                                                            6,500       10:1 compression                                                                          

 


TIMING SETS

CLIFFORD TIMING SETS ARE ENGINEERED TO WITHSTAND EXTREME HIGH LOADS & ARE PACKAGED AS MATCHED SETS THUS ELIMINATING NOISY OPERATION.  ALL TIMING SETS HAVE 3 OR MORE “KEY WAYS” IN THE CRANK SPROCKETS OR GEAR FOR EASY ADVANCE OR RETARDING CAMSHAFTS, EXCEPT MOPAR # 95-1972.

 

MAKE                         DESCRIPTION               PART #        TYPE

AMC/JEEP                 199, 232, 258, 4.0L                     97-1972        DOUBLE ROLLER               $119.00

AMC/GM                   151 CROSSFLOW                             92-3871        GEAR                                 $99.00

CHEVROLET            235 & 261                            92-3871        GEAR                                 $99.00

CHEVROLET            194, 230, 250, 292                        92-3871        GEAR                                 $99.00             

CHEVROLET            153 & 181 4 CYLINDER               92-3871        GEAR                                 $99.00  

FORD                         144, 170, 200                                  93-2971        DOUBLE ROLLER             $129.00                          

FORD                         240 & 300                                         93-3871        GEAR                                 $99.00

GMC                           248, 270, 302                                  92-3871        GEAR                                 $99-99

MOPAR                      170, 198, 225                       95-1972        DOUBLE ROLLER             $119.00

 

                                                                                                                                                                                         

 

 

REBUILD KITS

 

ALL REBUILD KITS CONSIST OF CAST PISTONS, CHROME RINGS, GASKETS, CLEVITTE BEARINGS, CLIFFORD CAMSHAFT, LIFTERS, SPRINGS, RETAINERS, VALVE LOCKS, & PUSHRODS.  YOU MUST STATE PISTON SIZE, ALONG WITH MAIN & ROD BEARING SIZES, ON YOUR ORDER.  ALL CAM BEARINGS ARE STANDARD SIZE. 

             

MAKE                       DESCRIPTION          PART #         TYPE      STYLE                                         

AMC/JEEP              199, 232, 258                    47-0258       CAST      DISHED              264H, 272H $899.00

 

AMC/JEEP              4.0L                                       47-0040       CAST      DISHED              264H, 272H $799.00

 

AMC/JEEP              2.5L 4 CYLINDER             47-0025       CAST      DISHED              264H, 272H $799.00

 

CHEVROLET         235 & 261                  42-0235       CAST      FLAT TOP          264H, 272H $999.00

                                                                                                                                260M, 268M

 

CHEVROLET         230, 250                               42-0250       CAST      DISHED              264H, 270H  $899.00

                                                                                                     

CHEVROLET         292                                         42-0292       CAST      .300 DISHED      264H, 270H $899.00

CHEVROLET         292                                         42-0292       CAST      .150 DISHED      264H, 270H $999.00

 

FORD                      144, 170, 200                    43-0200       CAST      DISHED              264H, 272H $899.00

FORD                      240 & 300                           43-0300       CAST      DISHED              264H, 270H $899.00

MOPAR                   170, 198, 225              45-0225-C   CAST CRANK                 264H, 272H $869.00

                                                                                                                                260M, 268M

MOPAR                   170, 198, 225              45-2225-F    FORGED CRANK            264H, 272H $869.00

                                                                                                                                260M, 268M

                                                                                                                                                                                     

 

THE PRODUCTS LISTED IN THIS CATALOG ARE INTENDED FOR RACING PURPOSES & SHOULD BE INSTALLED IN ACCORDANCE w/ STATE REGULATIONS PERTAINING TO EMISSION STANDARDS.  IT IS ALSO RECOMMENDED THAT ALL SMOG CONTROL & CATALYTIC CONVERTERS BE RETAINED AS REQUIRED BY LAW.  CALIFORNIA VEHICLE CODE SECTION 27156 PROHIBITS THE ADVERTISING, OFFERING FOR SALE, OR INSTALLATION OF ANY DEVICE WHICH MODIFIES A VEHICLE’S EMISSION CONTROL SYSTEM.  CLIFFORD HEADERS HAVE NOT YET RECEIVED AN EXCEMPTION FROM THIS CODE SECTION, & ARE, THEREFORE, NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON VEHICLES EQUIPPED w/ CATALYTIC CONVERTERS.

                                                  GENERAL LIMITED WARRANTY

The General Warranty applies to products manufactured by Jack Clifford’s Performance Inc. and returned within 6 months of the original purchase date. Parts not manufactured by Jack Clifford’s Performance Inc. are covered by the original manufacture’s warranty.  Jack Clifford’s Performance Inc. liability for defects in materials or workmanship is limited to repair, replacement or refund of the original purchase price at our discretion. In addition, Jack Clifford’s Performance Inc. will assume no responsibility for labor charges, incidentals or consequential damages caused from insufficient return packaging, improper installation, abuse, racing or normal wear of products.

ALL FREIGHT PREPAID! All items returned after 30 days may be subject to a restocking fee minimum of 30%. SOME PARTS MAY NOT BE ELIGBLE FOR RETRUN OR EXCHANGE.

ALL RETURNS MUST HAVE RGA #.

Please call Jack Clifford’s Performance Inc. in order to receive an RGA# in order to receive proper credit.

Please package the part (s) with enough packing material to protect the product from damages by the shipping carrier.

Special order carbs are not returnable or refundable for any reason.

 

 

 

   

 

 

 

 

 

 

 

 

 

       

 

 

 

 

 

 

 

SHIPPING CHARGES IN THE U.S. MAY CHANGE TO FIT YOUR AREA.

SHIPPING OUT OF THE COUNTRY & HAWAII WILL BE CHARGED EXTRA CARRIER PRICES.